 | Before bringing the trailer to the waters edge, first check that no one has
fiddled with your trailer coupling. eg undone safety chain or taken
D-shackle, winch handle or unlocked the tow-bar from the coupling. |
 | When you first put vessel on trailer, secure the winch cable AND safety
chain before proceeding up ramp. |
 | When you remove the bungs, watch to see how much water comes out. If
any or more than usual, get the hull checked for any damage or hairline
cracks in welds or seams and check the bungs have not lost their washers or
have worn thread. |
 | Secure all gear on-board and tie down boat to trailer before leaving the
ramp. |
 | At home,
 | Remove all gear and check it. |
 | Wash boat AND trailer with fresh water, including anchor and rope. |
 | Return all gear to vessel (or ensure it is returned before next outing) |
 | Check trailer and bearings - regrease if required. |
 | Secure vessel and trailer with trailer hitch lock, |
|